Crafted Workshop

View Original

How To Build A DIY Bottle Lamp, Dartboard Cabinet & YETI Patio Cooler Stand

In this project, I'll show you how to build a DIY bottle lamp, dartboard cabinet, and YETI patio cooler stand, all using basic power tools from True Value Hardware.


Dartboard Cabinet Materials List:

  • 2' x 2' ¾" plywood project panel
  • 1x4x8
  • 1x12x6
  • Hinges
  • Magnetic Catch
  • Speedball India Ink : http://amzn.to/2kBkXS3
  • Minwax Polycrylic
  • Metal French Cleat Hardware
  • Dartboard : http://amzn.to/2CMDfrn

Dartboard Cabinet Cut List:

Cut 1x4x8 into four pieces at the following lengths:

  • (2) pieces at 22 ¾"
  • (2) pieces at 24 ¼"

Cut two pieces from 1x12x6 at the following length:

  • (2) pieces at 25 ½"

If you're using a ½" rabbeting bit, you shouldn't need to cut your 2' by 2' project panel.


Patio Cooler Materials List:

  • YETI Tundra 45 Cooler
  • 2' x 4' ¾" plywood project panel
  • 1x8x8, I used Oak
  • Hairpin Legs : http://amzn.to/2FpkZ9l

Patio Cooler Cut List:

Cut the 1x8x8 into four pieces at the following lengths:

  • (2) pieces at 26 ½"
  • (2) pieces at 14"

Cut 2' x 4' plywood project panel to following size (remeasure the size of your rabbeted area to confirm measurements):

  • 25 ⅞" x 15"

Bottle Lamp Materials List:


Thanks for checking out the build article, let me know if you have any questions in the comments section below. Until next time, happy building!